Customization: | Available |
---|---|
Type: | Inverter |
Cathode Material: | NCM |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model
|
XD-501
|
Rated power
|
500W
|
Battery voltage
|
12/24V
|
Product size(mm)
|
335X210X122mm
|
General specifications
|
|||
Input
|
voltage
|
165V-275V
|
|
frequency
|
50Hz±3%
|
||
Output
|
voltage
|
220V±2%(battery mode)
|
|
frequency
|
50Hz±0.5Hz
|
||
Output waveform
|
pure sine wave
|
||
Output waveform distortion
|
≤3%
|
||
Mains charging current
|
Charging current 10-20A (can be changed according to customer requirements)
|
||
Solar charging current (optional)
|
10A-20A
|
||
|
LCD display contents include: input voltage, frequency, output voltage, battery capacity, load size, fault, overload, normal, etc.
2. Display the working status and capacity of the battery when the battery inverter is working |
||
Applicable type of battery
|
Lead acid battery/gel battery (water battery)/deep cycle battery
|
||
Operating mode (timing)
|
Battery (solar photovoltaic panel charging) priority/mains power priority
|
||
Conversion time
|
≤4ms
|
||
Efficiency
|
≥85%
|
||
Protect
|
overload
|
Overload 110%, automatic shutdown within 30 seconds: overload 120%, automatic shutdown within two seconds. The buzzer gives an
alarm when the power supply mode is overloaded and does not shut down |
|
short circuit
|
When the output is short circuited, the buzzer will sound for a long time, and the machine will shut down automatically 20 seconds
later |
||
battery
|
Battery high/low voltage protection: 1. When the battery voltage is greater than 110% of its rated voltage, the machine will give
an alarm, and when it is greater than 120% of its rated voltage, the inverter will automatically shut down. 2. When the battery voltage is less than 90% of its rated voltage, the inverter will give an alarm. When the battery voltage is less than 80% of its rated voltage, the inverter will automatically shut down. |
||
reverse connection
|
battery reverse connection protection (optional)
|
||
|
A
|
under normal working condition, the buzzer has no alarm sound
|
|
B
|
in case of battery failure and overload protection, the buzzer will sound 4 times per second
|
||
C
|
the buzzer prompts 5 times when the machine is normal during initial startup
|
||
Environment
|
noise
|
≤55dB
|
|
temperature
|
-10ºC-40ºC
|
||
relative humidity
|
10%-95%(non condensing)
|