| Customization: | Available |
|---|---|
| Application: | Communication |
| Type: | Multi-mode Fiber |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Overview
the mini closure is suit for branch splice.aerial mounting, hand hole should be available . meanwhile it suitable for direct buried application. The whole housing and base are made from PP material, which resistant to the oldage from the weather change. It is anti-fire ,waterproof. It protect the fiber avoid to tensile, impact... it is mechanical protection of the splice
Dimension and capacity
|
Outside dimension (Length * Width*Height) |
210mm*150mm*30mm |
|
Number of inlet/out ports 4 ports |
2 in 2 out |
|
Diameter of fiber cable |
Φ8mm~Φ18mm |
|
Max. Capacity of FOSC |
MAX 12F |
Mechanical and environmental Requirements
The standard testing method for optical fiber closure shall be IEC, EIA or JIS etc., and parameters concerned in the following. Bending Flexure), Compression (Crush), Cable Retention, Impact, Torsion, Vibration, Water Immersion, Ultraviolet Radiation (UV Resistance), temperature Cycling, Fungus Resistance, Chemical Resistance, re-entry test.
Dimension and capacity
Outside dimension (Length * Width*Height) 210mm*150mm*30mm
Number of inlet/out ports 4 ports :2 in 2 out
Diameter of fiber cable : Φ8mm~Φ18mm
Max. Capacity of FOSC :MAX 12F
Drop wire closure;fiber optic joint closure;fiber optic splice closure
Accessories
wrench, tape, clearance paper, heat shrink protective sleeve , nylon tie, hook and manual ect
Feature
Purpose: Aerial, direct-burying, wall-mounting, Pipeline laying way
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life:30 year
Application:
1.Be suitable for Aerial,Duct and Direct Buried application.
2.CATV environment, Telecommunications, Customer premises environments, Carrier Networks and fiber optic networks.
Product Specifications
| Moduel NO. | Inlet/Outlet | Max Capacity(single/ribbon) | Dimension (LW×H) | Cable Diameter(mm) | Sealing Method |
| SLGJS-24-S | 2/2 | 144/288Cores | 46.5×18.8×12CM | Φ7-Φ15 | Silica gel O-ring |
| SL-New-1 | 2/2 | 144/288Cores | 52×19×15CM | Φ7-Φ25 | Silica gel O-ring |
| SL-ABS-01 | 2/2 | 144/288 Cores | 46.5×18.8×12CM | Φ7-Φ15 | Silica gel O-ring |
| SL-ABS-02 | 3/3 | 144/288 Cores | 46.7×18×13CM | Φ7-Φ16 | Silica gel O-ring |
| SL-ABS-03 | 4/4 | 144/288 Cores | 46.7×18×12 CM | Φ7-Φ16 | Silica gel O-ring |
| SL-HF | 2/2 | 48/72 Cores | 47×17×8.5CM | Φ7-Φ20 | Stichy cincture |
| SLGJS-24 | 2/2 | 144/288 Cores | 58.5×19×14CM | Φ7-Φ30 | Stichy cincture |
| SLGJS-24-D | 3/3 | 288/576 Cores | 58×25.5×14CM | Φ7-Φ30 | Stichy cincture |
| SLGJS-24-8 | 4/4 | 288/576 Cores | 58×25.5×14CM | Φ7-Φ30 | Stichy cincture |
| SLGJS-24-D (PLC) | 3/3 | 1*32 | 58×25.5×14CM | Φ7-Φ30 | Stichy cincture |
| SL-NEW-2 | 2/2 | 24 Cores | 23×18.5×8.5CM | Φ2.4-Φ9.2 | Silica gel O-ring |
){kind=link}